Real-time GNSS Correciton Networks – Seiler territory
These Real-time GNSS Correction Networks can be used with both Trimble Mapping and Trimble Survey High Accuracy GNSS Receivers. Trimble Networks: Leica Networks: Missouri: [...]
A Good Solution Gets Better
Since the early days of satellite-based surveying, geospatial professionals have struggled to get centimeter-level accuracy when working on remote sites. Enter real-time kinematic (RTK) and real-time GNSS networks (RTN), both providing centimeter-level positioning in real time. In a recent article in America Surveyor, Trimble’s Mark Richter looks at the limitations of RTK and RTN and [...]
GNSS Settings: PDOP, SNR and Elevation Mask for Real-Time Settings TerraSync – video
GNSS Settings: PDOP, SNR and Elevation Mask for Real-Time Settings TerraSync - video Below is a video on how to set up the GNSS Settings for PDOP, SNR and Elevation Mask when using Real-Time Corrections in Trimble TerraSync https://www.youtube.com/watch?v=NLWuYhbDRxY If the video does not play please see our Seiler Solutions YouTube website These GNSS/PDOP settings [...]
Real-Time Settings in TerraSync for connecting to a VRS/RTN video
Real-Time Settings in TerraSync for connecting to a VRS/RTN video See our SeilerSoulitons You Tube page for a video on how to set up Real-Time Settings in TerraSync when obtaining corrections from a VRS*/RTN** network. Also, see our blog about GNSS/PDOP filter settings when using TerraSync with Real-Time corrections such as via a VRS/RTN network. These Trimble [...]
R1 GNSS Receiver – New GNSS Firmware 5.03 Released
R1 GNSS Receiver - New GNSS Firmware 5.03 Released Trimble R1 GNSS Receiver What's new in the GNSS Firmware 5.03? Improved GNSS performance NMEA configuration support RTX Any support. Please speak to your sales representative with any questions you may have about the different levels of Trimble RTX: See Trimble Positioning Service for [...]
VRS Real-Time PDOP Settings in TerraSync
VRS Real-Time PDOP Settings in TerraSync When using TerraSync in a VRS (Virtual Reference System) Real-time Correction Network here are the PDOP settings that should be used. Uncheck Smart Settings and set the following PDOP values to: Max PDOP: 6.0 Min SNR: 39.0 Min Elevation: 10 degrees *You will also want to set these [...]
Overview of Trimble GNSS Status App on an Android device – Connected to a Trimble R1 GNSS Receiver
Overview of Trimble GNSS Status App on an Android device - Connected to a Trimble R1 GNSS Receiver See our Seiler Solutions YouTube website to watch a video on how to use an "Android device, Trimble GNSS Status App with the Trimble R1 Receiver" https://www.youtube.com/watch?v=bqM7Y0CBAos **The Trimble R1 is a Sub-meter device. In this video the [...]